so that it does not leak any water.

 

If you want to install a water filter at your house, these are the steps for you to follow.1) You should carefully read the instructions before anything else. According to the instructions, there are four important factors that need to be considered before installing your water purifier:-The area which needs purified has to be cleared of any standing water or objects that might impede on the area in front of your purifier.-The pipes need to be clear and not blocked by corrosion. If they are corroded then it is best if an experienced plumber fixes them before proceeding with installation of a new purifier.-The pieces of equipment that you need to install have been selected to fit in the area.- The water supply pump needs to be strong enough for the pressure of your water supply . 

 

Image source:  https://www.amazon.com/

2) The first thing that you need to do is open the valve at your house supply and run a tap so that you can start drawing water from the well or a nearby water supply. After drawing enough water, you will then need to shut off the valve and disconnecting this pipe from the hose. Instead, connect it to whatever machine will take it. You can use a machine called a clack box which is easier than simply attaching this pipe to another hose.

Next is the most important step in installing your water purifier. You need to connect a piece of tubing from the bottom of the container with a rubber hose that will connect to your house supply. This pipe must be thick enough for pressure and must be perfectly tight

3) Next, you will connect another pipe with a small dial gauge on it to measure how much pressure your pipes are taking. Then you can put this hose over the drain from where you are drawing water from as it is still full of water making sure that the water level is still full and not overflowing. You must use a tape measure to test its tightness before attaching this pipe to the top of your purifier.

 

Image source:  https://www.flipkart.com/

4) The last thing that you need to do is to install that water supply pump that has a hose attached. You will have to attach this pipe with the hoses from your purifier so that you can connect them and either allow the pressure from the water supply pump to do all the work or else use a screw on connection (some people prefer to use one of these depending on how much pressure they need).

5) Now you will have started with your installation of your water purifier and there should be no more problems for you. When everything is working properly, you can enjoy drinking pure, clean water at all times. If you are still bothered with any problems, you can contact a professional plumber so that they can help you fix the problem that you are having. They can also advise on how to improve your purifier's efficiency and take good care of it as it is something that can be used at home as well as by a contractor or a consumer.